| Corrugator, ID10-OD58mm pipe corrugator, single wall corrugated pipe machine, corrugated pipe line |
min.pipe .I.D.: 10mm, max. pipe. o.d.: 58mm
Available models:
C58-B (blow moulding forming corrugator)
C58-V (vacuum forming corrugator)
C58-B-A (blow moulding forming and length adjustable corrugator)
C58-V-A (vacuum forming and length adjustable corrugator)
C58-V-A-S (vacuum forming/length adjustable/sequential running mode corrugator)
|
 |
 |
 |
 |
 |
two types of pipe corrugator:
Internal blow moulding
Vacuum forming
Blow Moulding:
This technology consist of blowing low pressure (0,1-1,5 bar) through the die head spider into the center of the continuously extruded hot plastic tube. The air is retained by a plug with metallic or silicone washers.
The hot plastic material is expanded by the internal air pressure against the corrugation machined in the mould blocks which chill and holds the tube against the moulds to provide the desired geometry. Corrugated products formed by internal air must have constant I.D. dimension.
Vacuum forming:
This technology consists of pulling the hot plastic tube against the mould blocks by vacuum suction applied through the moulds applied to the plastic tube outside diameter surface. Vacuum from the moulds keep the tube against the moulds to provide the desired geometry. Corrugated products formed by vacuum may have variable I.D. dimensions.
Applications
- cable protection
- TV, telephone
- glass fiber
- electricity
- control and computer cables
- automobiles, machines and airplanes
- medical applications
- washing machines
- dishwashers
|
|
|
|
